newer syndromes

[exileskim21]

about them, how much different are they, my one is older and its 1/2 inch thick, how bout the new ones, they're 5/8 inch thick. Also do they do that browning color thing on the nose still? Are they a little bit heaveir or are they just as light as the older ones?

[Walruz996]

I think syndromes have always been 5/8

[exileskim21]

no they were 1/2 before now they're 5/8

[Mapdash]

Anton will bring you answers he will.

[oicdn]

They were always 5/8's.....99% sure.

[Walruz996]

I'm pretty sure the only change is the thicker rails.

[Chrith]

yeah mine had supper thin rails which is you probably thought it was 1/2 inch

[exileskim21]

now i know for sure that myne was thinner, cause once you read the skimcity thing it says these newer syndromes rails are thicker

[Tad M.]

syndromes have ALWAYS been 5/8ths, they just had their rails tapered out aloooooot more..the new board have a thicker rail but are still tapered, just not as drastic. still just as light and still just as sick

[2good4u]

I want a new one with the thicker rails..twil be sickk..

[exileskim21]

o ok, sorry i thought they were 1/2 before, i mean they're great boards. im not putting them down i was just askin if they were anymore different

[AerialSkimmerBrad]

I thought the old versions were 1/2 " as well, thats what Ive been hearin'.

[a12stepa]

the rails have never been 1/2'' thick, always 5/8'' thats just rumor i suppose, but trust me the newer full rail boards are very fast and have so much pop its rediculous.

[skimmer-x]

They suck and so do you.

[AerialSkimmerBrad]

well why are they considered to be so thin if Exile and other brand companies have used 5/8" all the while?

[a12stepa]

frank, suck a dick

[Anton]

The boards have always used 5/8" thick foam. Some people thought they were thinner because the rails were planed down so much, but the board thickness in the center has always been 5/8".

I posted this a couple weeks ago on another thread:

"Yeah, the older boards (shaped last year) were pretty thin in the rails. The boards were still 5/8" thick in the center, but we were planing the rails down and tapering them a lot more. This really increased the hold down the line, but did take some getting used to.

Since then, the newer boards have much fuller rails. They're still not completely boxy, so the feel down the line is pretty much the same, but the ride in general is a lot more forgiving. We've learned that you can still get that grippy line hold without going crazy with rail taper. I think this fuller rail takes away a lot of the "learning curve" that some people notice. Basically, you don't have to be an "expert" just be able to get on the board."

[skimmer-x]

For free or for $$$?

[a12stepa]

haha i cant even reply to that....thats just nasty

[Tad M.]

we all know you've paid for Frank's services before aaron...

[2good4u]

Who hasn't???..